|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
KBJ6005G THRU KBJ610G SINTERED GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes KBJ FEATURES .189(4.80) .173(4.40) .150(3.80) .134(3.40) .602(15.30) .579(14.70) .146(3.70) .130(3.30) .992(25.20) .134(3.40) .122(3.10) .976(24.80) .158(4.00) Nominal .075(1.90) .059(1.50) .043(1.10) .035(0.90) .382(9.70) .701(17.80) .677(17.20) .367(9.30) .114(2.90) .098(2.50) Glass Passivated Die Construction High Case Dielectric Strength of 1500VRMS Low Reverse Leakage Current Surge Overload Rating to 170A Peak Ideal for Printed Circuit Board Applications Plastic Material-UL Recognition Flammability Classification 94V-0 * This Series is UL Listed Under Recognized Component Index, File Number E95060 * * * * * * .303(7.70) .303(7.70) .303(7.70) .287(7.30) .287(7.30) .287(7.30) .032(0.80) .024(0.60) MECHANICAL DATA Case : KBJ molded plastic Terminals : Plated Leads, solderable per MIL-STD-750, Method 2026 Polarity : Molded on body Mounting : Through Hole for # 6 screw Mounting torque : 5.0 in-lbs maximum Weight : 4.6 grams *Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current @ TC=110 C o o SYMBOLS 6005G VRRM VRMS VDC I (AV) 50 35 50 601G 100 70 100 602G 200 140 200 KBJ 604G 400 280 400 UNITS 606G 600 420 600 608G 800 560 800 610G 1000 700 1000 Volts Volts Volts Amps 6.0 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ IF=3.0 A Maximum DC reverse current at rated DC blocking voltage I2t rating for fusing ( t < 8.3ms ) ( NOTE 3) Typical junction capacitance per element (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range @TC=25 C @TC=125 C o o IFSM 170 Amps VF 1.0 5.0 Volts IR I2t CJ R JC 500 120 80 6.0 -65 to +150 uA 2 As pF K/W o TJ,TSTG C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. (2) Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink. (3) Non-repetifive, for t > 1ms and < 8.3ms. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES KBJ6005G THRU KBJ610G FIG.1 - FORWARD CURRENT DERATING CURVE 6 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES With heatsink FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 180 PEAK FORWARD SURGE CURRENT, AMPERES TJ=150 C Single half-sine-wave (JEDEC Method) o 5 4 3 Without heatsink 160 120 80 2 1 Resistive or Inductive Load 40 0 0 25 50 75 100 o 0 125 150 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES 1000 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT TJ=150 C o 1.00 TJ=150 C o INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=150 C o o 100 TJ=125 C TJ=100 C o 10 0.10 1.0 PULSE WIDTH=300uS 0.01 0 0.4 0.8 1.2 1.6 1.8 0.1 0 20 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=25 C o 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF TJ = 25 C o 100 10 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation |
Price & Availability of KBJ604G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |